HP Z840

Product features

Feature	Description
Chipset	Intel® C612 Chipset
Graphics	Intel HD Graphics on all models (integrated on processor) NVIDIA NVS 310 512MB 1st GFX NVIDIA Quadro K2200 4GB 1st GFX NVIDIA Quadro K4200 4GB 1st GFX AMD FirePro W2100 2GB 1st GFX NVIDIA NVS 310 512MB 2nd GFX NVIDIA Quadro K2200 4GB 2nd GFX NVIDIA Quadro K4200 4GB 2nd GFX AMD FirePro W2100 2GB 2nd GFX NVIDIA Quadro K2200 4GB 3rd GFX
Processors	Intel Xeon E5-2620v3 2.4 1866 6C 1stCPU Intel Xeon E5-2630v3 2.4 1866 8C 1stCPU Intel Xeon E5-2637v3 3.5 2133 4C 1stCPU Intel Xeon E5-2620v3 2.4 1866 6C 2ndCPU Intel Xeon E5-2630v3 2.4 1866 8C 2ndCPU Intel Xeon E5-2637v3 3.5 2133 4C 2ndCPU
Storage/hard drives	SAS Hard Drives: 600GB* SAS 15K rpm 6Gb/s 3.5″ HDD 300GB* SAS 15K rpm 6Gb/s 3.5″ HDD HP 300GB* SAS 10K SFF HDD HP 600GB* SAS 10K SFF HDD HP 1.2TB* SAS 10K SFF HDD note:*For storage drives, GB = 1 billion bytes. TB = 1 trillion bytes. Actual formatted capacity is less. Up to 30GB of system disk is reserved for system recovery software.Up to 5 SATA drives, 5 SAS, drives, or 6 SATA 2.5″, Small Form Factor (SFF) drives 8 port SAS Controller included on the system board SATA Hard Drives: 3.0TB* SATA 7200 rpm 6Gb/s 3.5″ HDD 2.0TB* SATA 7200 rpm 6Gb/s 3.5″ HDD 1TB* SATA 7200 rpm 6Gb/s 3.5″ HDD 500GB* SATA 7200 rpm 6Gb/s 3.5″ HDD 500GB* SATA 7.2K SED SFF HDD note:*For storage drives, GB = 1 billion bytes. TB = 1 trillion bytes. Actual formatted capacity is less. Up to 30GB of system disk is reserved for system recovery software.Up to 5 SATA drives, 5 SAS, drives, or 6 SATA 2.5″, Small Form Factor (SFF) drives SATA Solid State Drives (SSDs): HP 128GB* SATA 6Gb/s SSD HP 256GB* SATA 6Gb/s SSD HP 512GB* SATA 6Gb/s SSD HP 1TB* SATA 6Gb/s SSD Samsung Enterprise 240GB* SATA SSD Samsung Enterprise 480GB* SATA SSD Intel Pro 1500 180GB* SATA SSD HP 256GB* SATA 6Gb/s SED Opal 1 SSD note:The 256GB Self-Encrypting Drive (SED) version has similar performance to the standard 256GB SSD. It is also available in Opal 1.0 and Opal 2.0 versions.*For storage drives, GB = 1 billion bytes. TB = 1 trillion bytes. Actual formatted capacity is less. Up to 30GB of system disk is reserved for system recovery software. PCIe SSDs: HP Z Turbo Drive 512GB* SSD HP Z Turbo Drive 256GB* SSD note:*For storage drives, GB = 1 billion bytes. TB = 1 trillion bytes. Actual formatted capacity is less. Up to 30GB of system disk is reserved for system recovery software.
Memory	4GB DDR4-2133 ECC Registered RAM 8GB DDR4-2133 ECC Registered RAM 16GB DDR4-2133 ECC Registered RAM 32GB DDR4-2133 ECC Load Reduced (LR) RAM note:Identical memory components are used to build the CTO configurations as are available as After Market Options (AMO). The AMO Option Kit Part # are shown alongside the memory DIMMs.For details on the supported memory configurations on the HP Z840 Workstation, please refer to the System Technical Specifications – System Board section of this document.DIMMs should be equally distributed across all four memory channels for optimal performance.Each processor supports up to 4 channels of DDR4 memory. To realize full performance at least 1 DIMM must be inserted into each channel.The CPUs determine the speed at which the memory is clocked. For example, if a 1600MHz capable CPU is used in the system, the maximum speed the memory will run at is 1600MHz regardless of the specified speed of the memory.You cannot intermix LR DIMMs with Registered DIMMs. The system will not work.Maximum memory capacities assume Windows 64-bit operating systems or Linux. With Windows 32-bit operating systems, memory above 3 GB may not all be available due to system resources.
Networking/Communications	HP X520 10GbE Dual Port Adapter HP 10GbE SFP+ SR Transceiver Intel Ethernet I210-T1 PCIe NIC Intel 7260 802.11 a/b/g/n PCIe WLAN NIC Integrated Intel I210AT PCIe GbE Controller Integrated Intel I218LM PCIe GbE Controller HP 361T PCIe Dual Port Gigabit NIC note:”Gigabit” or “GbE” Ethernet indicates compliance with IEEE standard 802.3ab for Gigabit Ethernet, and does not connote actual operating speed of 1 Gb/sec. For high speed transmission, connection to a Gigabit Ethernet server and network infrastructure is required.*Wireless access point and internet service required. Availability of public wireless access points limited.
Audio/Multimedia	Integrated Realtek HD ALC221 Audio
Input Devices	Keyboard: HP USB Smart Card Keyboard HP 2.4GHz Wireless Keyboard & Mouse HP USB Optical 3-Button 2.9M OEM Mouse HP SpaceExplorer 3D USB Controller Mice: HP SpacePilot 3D USB Intelligent Controller HP PS/2 Keyboard HP PS/2 Mouse HP USB Keyboard HP USB Optical Mouse HP USB 1000dpi Laser Mouse HP Internal USB Port Kit HP SAS Back Panel Connector Kit HP eSATA PCI Cable Kit HP Power Cord Kit HP Workstation Mouse Pad HP Optical Bay HDD Mounting Bracket HP ENERGY STAR® Qualified Configuration note:The HP Internal USB Port kit has a single USB 2.0 type A connector.No hot plug / hot swap supported with eSATA

Power specifications

Specification	Description
Power Supply	850 W 88% Efficient, Custom PSU (Wide-Ranging, Active PFC) 1125 W/1275 W*/1450 W* 90% Efficient, Custom PSU (Wide-Ranging, Active PFC)
Operating voltage range	90-269 VAC
Rated voltage range	850 W 100-127 V 200-240 V 118 V 1125 W 100 V 115-127 V 200-240 V 118 V
Rated line frequency	50–60 Hz 400 Hz
Operating line frequency range	47–66 Hz 393–407 Hz
Rated input current	850 W 11 A @ 100-127 V 5.5 A @ 200-240 V 11 A @ 118 V 1125 W 12A @ 100 V 12A @ 115-127 V 10A @ 200-240 V 12 A @ 118 V
Heat Dissipation (Configuration and software dependent)	850 W Typical = 2142 btu/hr (540kg-cal/hr) Maximum = 3335 btu/hr (840 kg-cal/hr) 1125 W Typical = 2773 btu/hr (699 kg-cal/hr) Maximum-1 = 3878 btu/hr (977 kg-cal/hr) Maximum-2 = 5002 btu/hr (1260 kg-cal/hr) Maximum-3 = 5624 btu/hr (1417 kg-cal/hr)
Power Supply Fan	(2) 80×25 mm variable speed
ENERGY STAR Qualified (Configuration dependent)	Yes
Power supply efficiency	850 W 88% Efficient The Z840 850W power supply efficiency report can be found at this link: TBD 1125 W 90% Efficient The Z840 1125W power supply efficiency report can be found at this link: TBD
FEMP Standby Power Compliant @115V (<2W in S5 – Power Off)	Yes
EuP Compliant @ 230V (<0.5W in S5 – Power Off)	Yes
CECP Compliant @ 220V (<4W in S3 – Suspend to RAM)	Yes; Configuration dependent
Power Consumption in sleep mode (as defined by ENERGY STAR) – Suspend to RAM (S3) (Instantly Available PC)	850 W <15 W 1125 W <35 W
Built-in Self-Test LED	Yes
Surge Tolerant Full Ranging Power Supply (withstands power surges up to 2000V)	Yes
	note:*Input voltage restriction note:The 1125 W power supply can also supply 1275 W of output power when the input voltage is greater than 105 V. If the input voltage is less than 105 V, but greater than 90 V for any reason, the maximum power that can be drawn is 1125 W. An uninterruptible power supply (UPS) is highly recommended if 1275 W output power is desired. The 1125 W Power Supply can also supply 1450 W of output power when the input voltage is greater than 180 V under all conditions.
AUX IN (audio)	No
Clear CMOS Button	Yes
Multibay Header	No
Integrated Gigabit Ethernet	Yes, dual port
Access Panel Solenoid Lock Header	No
Access Panel Intrusion Sensor Header	Yes, as part of the Front UI (Control Panel) cable header
Memory Fan Connector	Yes, blind-mate

Hard Drives

600GB SAS 15K rpm 6Gb/s 3.5″ HDD
Specification	Description
Capacity	600GB
Height	2.54 cm (1 in)
Width	Media Diameter 8.9 cm (3.5 in) Physical Size 10.17 cm (4 in)
Interface	SAS
Synchronous Transfer Rate (Maximum)	6.0 Gb/s
Buffer	16 MB
Seek time (typical reads, includes controller overhead, including settling)	Single Track 0.2 ms Average 3.4 ms Full Stroke 6.6 ms
Rotational Speed	15,000 rpm
Logical Blocks	1,172,123,568 – 512 byte blocks
Operating temperature	10° to 35° C (50° to 95° F)

300GB SAS 15K rpm 6Gb/s 3.5″ HDD
Specification	Description
Capacity	300GB
Height	2.54 cm (1 in)
Width	Media Diameter 8.9 cm (3.5 in) Physical Size 10.17 cm (4 in)
Interface	SAS
Synchronous Transfer Rate (Maximum)	6Gb/s
Buffer	16MB
Seek Time (typical reads, includes controller overhead, including settling)	Single Track 0.2 ms Average 3.4 ms Full Stroke 6.6 ms
Rotational Speed	15,000 rpm
Operating temperature	10° to 35° C (50° to 95° F)

HP 300GB SAS 10K SFF HDD
Specification	Description
Capacity	300GB
Height	1.53 cm (0.6 in)
Width	Media Diameter 6.36 cm (2.5 in) Physical Size 6.99 cm (2.75 in)
Interface	SAS Gb/s
Synchronous Transfer Rate (Maximum)	Up to 600 MB/s
Buffer	64MB
Cache	multi-segmentable cache buffer
Seek Time (typical reads, includes controller overhead, including settling)	Single Track 0.4 ms (max) Average 3.6 ms Full Stroke 7.3 ms
Rotational Speed	10,000 rpm
Logical Blocks	585,937,500
Operating temperature	5° to 55° C (41° to 131° F)

HP 600GB SAS 10K SFF HDD
Specification	Description
Capacity	600GB
Height	1.53 cm (0.6 in)
Width	Media Diameter: 6.36 cm (2.5 in) Physical Size: 6.99 cm (2.75 in)
Interface	SAS 6Gb/s
Synchronous Transfer Rate (Maximum)	Up to 600MB/s
Buffer	64MB
Cache	multi-segmentable cache buffer
Seek Time (typical reads, includes controller overhead, including settling)	Single Track: 0.4 ms (max) Average: 3.6 ms Full Stroke: 7.3 ms
Rotational Speed	10,000 rpm
Logical Blocks	1,172,123,568
Operating temperature	5° to 55° C (41° to 131° F)

HP 1.2TB SAS 10K SFF HDD
Specification	Description
Capacity	1.2TB
Height	1.53 cm (0.6 in)
Width	Media Diameter: 6.36 cm (2.5 in) Physical Size: 6.99 cm (2.75 in)
Interface	SAS 6Gb/s
Synchronous Transfer Rate (Maximum)	Up to 600MB/s
Buffer	64MB
Seek Time (typical reads, includes controller overhead, including settling)	Single Track: 0.18ms (max) Average: 3.5ms Full Stroke: 7.17ms
Rotational Speed	10,000 rpm
Logical Blocks	2,344,225,968
Operating Temperature	5° to 55° C (41° to 131° F)

500GB SATA 10K rpm SFF HDD
Specification	Description
Capacity	500GB
Height	1.53 cm (0.6 in)
Width	Media Diameter: 6.36 cm (2.5 in) Physical Size: 6.99 cm (2.75 in)
Interface	Serial ATA (6.0Gb/s)
Synchronous Transfer Rate (Maximum)	Up to 600MB/s
Buffer	64MB
Cache	Adaptive
Seek Time (typical reads, includes controller overhead, including settling)	Single Track: 1.2 ms (typical) Average: 3.6 ms Full Stroke: 9.0 ms (typical)
Rotational Speed	10K rpm
Operating Temperature	5° to 55° C (41° to 131° F)

1TB SATA 7200 rpm 6Gb/s 3.5″ HDD
Specification	Description
Capacity	1 Terabyte (1000 GB)
Height	2.54 cm (1 in)
Width	Media Diameter: 8.9 cm (3.5 in) Physical Size: 10.17 cm (4 in)
Interface	Serial ATA (6Gb/s)
Synchronous Transfer Rate (Maximum)	Up to 600 MB/s
Buffer	64MB
Seek Time (typical reads, includes controller overhead, including settling)	Single Track: 1.2ms (typical) Average: 11 ms Full Stroke: 21ms (typical)
Rotational Speed	7,200 rpm
Logical Blocks	1,953,525,168
Operating Temperature	5° to 55° C (41° to 131° F)

2.0TB SATA 7200 rpm 6Gb/s 3.5″ HDD
Specification	Description
Capacity	2 TB
Height	2.54 cm (1 in)
Width	Media Diameter: 8.9 cm (3.5 in) Physical Size: 10.17 cm (4 in)
Interface	Serial ATA (6.0 Gb/s), NCQ Enabled
Synchronous Transfer Rate (Maximum)	Up to 600MB/s
Buffer	64MB
Seek Time (typical reads, includes controller overhead, including settling)	Single Track: 1.0 ms Average: 11 ms Full Stroke: 18 ms
Rotational Speed	7,200 rpm
Logical Blocks	3,907,029,168
Operating Temperature	5° to 55° C (41° to 131° F)

3.0TB SATA 7200 rpm 6Gb/s 3.5″ HDD
Specification	Description
Capacity	3.0 TB
Height	2.54 cm (1 in)
Width	Media Diameter: 8.9 cm (3.5 in) Physical Size: 10.17 cm (4.0 in)
Interface	Serial ATA (6.0Gb/s), NCQ enabled
Synchronous Transfer Rate (Maximum)	Up to 6.0 Gb/s
Buffer	64MB
Seek Time (typical reads, includes controller overhead, including settling)	Single Track: 0.6 ms Average: 11 ms Full Stroke: Not specified
Rotational Speed	7200 rpm
Operating Temperature	5° to 60° C (41° to 140° F)

500GB SATA 7.2K SED SFF HDD
Specification	Description
Capacity	500 GB
Height	0.7 cm (0.275 in)
Width	Media Diameter: 6.36 cm (2.5 in) Physical Size: 6.99 cm (2.75 in)
Interface	Serial ATA (6Gb/s)
Synchronous Transfer Rate (Maximum)	Up to 600 MB/s
Buffer	32 MB
Seek Time (typical reads, includes controller overhead, including settling)	Single Track: 1 ms Average: 4.2 ms Full Stroke: 25 ms (typical)
Rotational Speed	7,200 rpm
Operating Temperature	0° to 60° C (32° to 140° F)

HP 128GB SATA 6Gb/s SSD
Specification	Description
Capacity	128GB
Height	0.7 cm (0.28 in)
Width	Physical Size: 6.36 cm (2.5 in)
Interface	SATA 6Gb/s
Synchronous Transfer Rate (Maximum)	Up to 500MB/s (Sequential Read)
Operating Temperature	0° to 70° C (32° to 158° F)

HP 256GB SATA 6Gb/s SSD
Specification	Description
Capacity	256GB
Height	0.7 cm (0.28 in)
Interface	SATA 6Gb/s
Synchronous Transfer Rate (Maximum)	Up to 500MB/s (Sequential Read)
Operating Temperature	0° to 70° C (32° to 158° F)

HP 256GB SATA 6Gb/s SED Opal 1SSD
Specification	Description
Capacity	256GB
Height	0.7 cm (0.28 in)
Width	Physical Size: 6.36 cm (2.5 in)
Interface	6Gb/s SATA
Synchronous Transfer Rate (Maximum)	Up to 500MB/s (Sequential Read)
Operating Temperature	0° to 70° C (32° to 158° F)

HP 512GB SATA 6Gb/s SSD
Specification	Description
Capacity	512GB
Height	0.7 cm (0.28 in)
Width	Physical Size: 6.36 cm (2.5 in)
Interface	6Gb/s SATA
Synchronous Transfer Rate (Maximum)	Up to 550MB/s (Sequential Read)
Operating Temperature	0° to 70° C (32° to 158° F)

HP 1TB SATA 6Gb/s SSD
Specification	Description
Capacity	1 TB
Height	0.7 cm (0.28 in)
Width	Physical Size: 6.36 cm (2.5 in)
Interface	6Gb/s SATA
Synchronous Transfer Rate (Maximum)	Up to 550MB/s (Sequential Read)
Operating Temperature	0° to 70° C (32° to 158° F)

Samsung Enterprise 240GB SATA SSD
Specification	Description
Capacity	240GB
Width	Physical Size: 6.36 cm (2.5 in)
Interface	SATA 6Gb/s
Synchronous Transfer Rate (Maximum)	600 Mb/s

Samsung Enterprise 480GB SATA SSD
Specification	Description
Capacity	480GB
Width	Physical Size: 6.36 cm (2.5 in)
Interface	SATA 6Gb/s
Synchronous Transfer Rate (Maximum)	600 Mb/s

Intel Pro 1500 180GB SATA SSD
Specification	Description
Capacity	180GB
Width	Physical Size: 6.36 cm (2.5 in)
Interface	6Gb/s SATA
Synchronous Transfer Rate (Maximum)	600 Mb/s
Operating Temperature	0° to 70° C (32° to 158° F)

HP Z Turbo Drive 256GB SSD
Specification	Description
Capacity	256GB
Interface	PCI Express 2.0 x4 electrical x4 physical
Operating Temperature	0° to 70° C (32° to 158° F)

HP Z Turbo Drive 512GB SSD
Specification	Description
Capacity	512GB
Interface	PCI Express 2.0 x4 electrical x4 physical
Operating Temperature	0° to 70° C (32° to 158° F)

Graphics

Specification	Description
Form factor	Low Profile: 2.7 inches (H) x 5.7 inches (L), Half-Height Weight: ~142 grams
Graphics controller	NVIDIA NVS 310 GPU: GF119-825
Bus type	PCI Express x16, 2.0 compliant
Memory	Size: 512MB DDR3 Clock: 875MHz Memory Bandwidth: 14GB/s
Connectors	2 x DisplayPort
Maximum Resolution	Up to 2560 x 1600 (digital display) per display
Image Quality Features	The following video formats are supported: MPEG2 MPEG4 Part 2 Advanced Simple Profile H.264 SVC codec support Support for 3D Blu Ray VC1 DivX version 3.11 and later MVC A full range of video resolutions are supported including 1080p, 1080i, 720p, 480p and 480i. The NVS 310 GPU provides hardware acceleration for the computationally intensive parts of video processing, as well as provides improved video playback speeds via faster decode and transcode.
Display Output	Up to 2 displays in the following configurations: DisplayPort output: Drives two DisplayPort enabled digital display at resolutions up to 2560 × 1600 at 60 Hz with reduced blanking, when connected natively using the 2 DisplayPort connectors on the NVS 310 graphics card Supports 2 monitors up to resolution of 1920 × 1200 at 60 Hz with reduced blanking using DisplayPort 1.2 multi stream topology technology. DVI-D output: Drives two digital display at resolutions up to 1920 × 1200 at 60 Hz with reduced blanking using DisplayPort to DVI-D single-link cable adaptors Drives two digital display at resolutions up to 2560× 1600 at 60 Hz with reduced blanking using DisplayPort to DVI-D dual-link cable adaptors HDMI output: NVS 310 is capable of driving two high definition (HD) panels up to resolutions of 1920 × 1080P at 60 Hz using DisplayPort to HDMI cable adaptors VGA display output: Drives two analog display at resolutions up to 1920 × 1200 at 60 Hz using DisplayPort to VGA cable adaptor
Shading Architecture	Shader Model 5.0
Supported Graphics APIs	DX11, OpenGL 4.1
Available Graphics Drivers	Windows 8 Genuine Windows 7 Professional (64-bit and 32-bit) Microsoft Windows XP Professional (64-bit and 32-bit) Red Hat Enterprise Linux(RHEL) SUSE Linux Enterprise Desktop 11 (64-bit and 32-bit) HP qualified drivers may be preloaded or the latest HP qualified drivers are available from the HP support Web site. SUSE Linux Enterprise drivers may also be obtained from: ftp://download.nvidia.com/novell or http://www.nvidia.com
note:1 The thermal solution used on this card is an active fan heatsink.2 Factory configured NVS 310 graphics card have no cable adapters included. Adapters must be ordered separately.3 Option kit NVS 310 includes 2 DP to DVI-D cable adapters.

Specification	Description
Form factor	Low Profile: 2.713 inches in height × 5.7 inches in length Weight: ~ 142 grams
Graphics controller	NVIDIA NVS 315 (using GF119-825 GPU) Number of Cores: 48 CUDA cores Max. Power: 19.3W Cooling Solution: Active fan heatsink
Connectors	DMS-59 output Cables included: For CTO: DMS-59 to DVI cable For AMO: DMS-59 to DVI cable and DMS-59 to VGA cable
Maximum Resolution	Maximum number of displays supported: 2 Maximum Resolution Support: DMS-59 to VGA: 2048 x 1536 @ 85Hz DMS-59 to DVI: 1980 x 1200 @ 60Hz DMS-59 to DP: 2560 x 1600 @ 60Hz
Image Quality Features	See Display Output section. The following video formats are supported: MPEG2 MPEG4 Part 2 Advanced Simple Profile H.264 SVC codec support Support for 3D Blu Ray VC1 DivX version 3.11 and later A full range of video resolutions are supported including 1080p, 1080i, 720p, 480p and 480i. The NVS 315 GPU provides hardware acceleration for the computationally intensive parts of video processing, as well as provides improved video playback speeds via faster decode and transcode.
Display Output	Up to 2 displays using one of the following DMS-59 cables: DMS-59 to DVI DMS-59 to VGA DMS-59 to DP DisplayPort output: Drives two DisplayPort enabled digital displays at resolutions up to 2560 × 1600 at 60 Hz with reduced blanking, when connected via the DMS-59 to DP adapter. DVI-D output: Drives two digital displays at resolutions up to 1920 × 1200 at 60 Hz with reduced blanking using DMS-59 to DVI-D single-link cable adaptor VGA display output: Drives two analog displays at resolutions up to 2048 × 1536 at 85 Hz using DMS-59 to VGA cable adaptor.
Shading Architecture	Shader Model 5.0
Supported Graphics APIs	DX11, OpenGL 4.3
Available Graphics Drivers	Windows 8 Genuine Windows 7 Professional (64-bit and 32-bit) Microsoft Windows XP Professional (64-bit and 32-bit) Red Hat Enterprise Linux(RHEL) SUSE Linux Enterprise Desktop 11 (64-bit and 32-bit) HP qualified drivers may be preloaded or the latest HP qualified drivers are available from the HP support Web site. SUSE Linux Enterprise drivers may also be obtained from: ftp://download.nvidia.com/novell or http://www.nvidia.com
note:1 The thermal solution used on this card is an active fan heatsink.2 Factory configured graphics card includes DMS-59 to DVI cable.3 Option kit graphics card includes DMS-59 to DVI and DMS-59 to VGA cables (one each).

Specification	Description
Form factor	Low Profile, 2.713 inches × 6.3 inches, single slot
Graphics controller	NVS 510 GPU Core Clock: 797 MHz Memory Clock: 891 MHz CUDA Cores: 192
Bus Type	PCI Express x16, Generation 2.0
Memory	2GB DDR3
Connectors	Four mini-DisplayPort. Four mini-DisplayPort to DisplayPort adapters included. (DisplayPort to DVI-D, DisplayPort to VGA, DisplayPort to HDMI, and DisplayPort to Dual-Link DVI adapters available as separate accessories.)
Maximum Resolution	Mini-DisplayPort connectors support ultra-high-resolution panels (up to 3840 x 2160 @ 60Hz) note:This card supports up to four displays. For Windows XP, only 2 active displays are supported.
Image Quality Features	10-bit internal display processing, including hardware support for 10-bit scan-out
Display Output	DisplayPort with Multi-Stream Technology (MST) and High Bit Rate 2 (HBR2) support. Digital Display Support DisplayPort Output Drives four DisplayPort enabled digital display at resolutions up to 3840 × 2160 at 60 Hz with reduced blanking, when connected natively using the 4 DisplayPort connectors on the NVS 510 graphics card. DisplayPort Multi-Stream Topology (MST) Technology: Supports various combinations of display resolutions and number of displays when using DisplayPort multi stream topology technology – up to a maximum of 4 monitors at a resolution of 1920 × 1200 at 60 Hz with reduced blanking. DVI-D Output Drives four digital displays at resolutions up to 1920 × 1200 at 60 Hz with reduced blanking using DisplayPort to DVI-D single-link cable adaptors. Drives four digital displays at resolutions up to 2560× 1600 at 60 Hz with reduced blanking using DisplayPort to DVI-D dual-link cable adaptors. HDMI Output The NVS 510 graphics board is capable of driving four high definition (HD) panels up to resolutions of 1920 × 1080P at 60 Hz using DisplayPort to HDMI cable adaptors. Analog Display Support VGA display output: Drives four analog displays at resolutions up to 1920 × 1200 at 60 Hz using DisplayPort to VGA cable adaptors.
Supported Graphics APIs	Full Microsoft DirectX 11, Shader Model 5.0 support Full OpenGL 4.3 support
Available Graphics Drivers	Genuine Windows 7 Professional (64-bit and 32-bit) Microsoft Windows XP Professional (64-bit and 32-bit) Red Hat Enterprise Linux(RHEL) SUSE Linux Enterprise Desktop 11 (64-bit and 32-bit) HP qualified drivers may be preloaded or the latest HP qualified drivers are available from the HP support Web site.
note:Heatsink cooler design is active.

Graphics Cable Adapter option choice is available starting Feb 1 2013 for the following graphics cards: NVS 310, Quadro 410, Quadro K5000, FirePro V3900, FirePro W7000 New Graphics Cards introduced after Feb 1 2013 will be eligible for choosing Graphics Cable Adapters, unless otherwise specified. No cable choice for NVS 300, NVS 510. Maximum number of cables allowed is 8.

Specification	Description
Form factor	2.713” H x 6.3” L Single Slot, Low Profile Full Height Profile bracket installed Low Profile bracket included Weight: 133 grams
Graphics controller	NVIDIA Quadro K620 Graphics Card GM107 GPU 384 CUDA cores Max Power: 45 Watts
Memory	2 GB GDDR3, 900 MHz 128-bit memory I/O path 29 GB/s memory bandwidth
Bus type	PCI Express 2.0 x16
Connectors	1 DL-DVI(I) output, 1 DisplayPort output Factory Configured: No video cable adapter included Option Kit: One DP-to-DVI adapter included with card Additional DVI-to-VGA, DisplayPort-to-VGA or DisplayPort-to-DVI adapters are available as Factory Configuration or Option Kit accessories.
Maximum Resolution	DisplayPort 1.2: up to 4096×2160 x 30 bpp @ 60Hz supports High Bit Rate 2 (HBR2) and Multi-Stream Transport (MST) up to 2560 x 1600 x 32 bpp @ 60Hz up to 1920 x 1200 x 32 bpp @ 60Hz Dual Link DVI(I) output: Single Link-DVI(I) output:
Image Quality Features	10-bit internal display processing pipeline 10-bit scan-out support
Display Output	1 Dual-link DVI-I connector 1 Display Port connector
Shading Architecture	Full Microsoft DirectX 11.1 Shader Model 5.0
Supported Graphics APIs	OpenGL 4.4 DirectX 11.1 API support includes CUDA C, CUDA C++, DirectCompute 5.0, OpenCL, Java, Python, and Fortran
Available Graphics Drivers	Microsoft Windows 8.1 Microsoft Windows 8 Microsoft Windows 7 Linux HP qualified drivers may be preloaded or available from the HP support Web site.
note:1 Factory configured Quadro K420 does not include any video adapters. Adapters must be ordered separately.2 Option kit Quadro K420 includes one DP to DVI-D adapter.

Specification	Description
Form factor	Low Profile: 2.713 inches × 6.3 inches, single slot
Graphics controller	NVIDIA Quadro K420 GPU: GK107
Connectors	One dual-link DVI-I connector One DisplayPort connector
Memory	Size: 1GB DDR3 Clock: 891MHz Memory Bandwidth: 29GB/s
Bus type	PCI Express x16, 2.0 compliant
Maximum Resolution	VGA (via adapter cable): 2048 × 1536 × 32 bpp at 85 Hz Dual-Link DVI: 2560 × 1600 × 32 bpp at 60 Hz (reduced blanking) Single Link-DVI: 920 × 1200 × 32 bpp at 60 Hz (reduced blanking) DisplayPort 1.2 3840 × 2160 × 30 bpp at 60 Hz
RAMDAC	400 MHz integrated RAMDAC
Display Output	Maximum number of displays supported: 2
Shading Architecture	Shader Model 5.0
Supported Graphics APIs	DX11, OpenGL 4.4 Programming support for CUDA C, CUDA C++, DirectCompute 5.0, OpenCL, Python, and Fortran
Available Graphics Drivers	Microsoft Windows 8.1 Microsoft Windows 8 Microsoft Windows 7 Linux
note:1 Factory configured Quadro K420 does not include any video adapters. Adapters must be ordered separately.2 Option kit Quadro K420 includes one DP to DVI-D adapter.

Specification	Description
Form factor	4.38” H x 7.97” L Single Slot, Full Height Weight: 240 grams
Graphics controller	NVIDIA Quadro K2200 Graphics Card GM107 GPU 640 CUDA cores Max Power: 67.7 Watts
Bus Type	PCI Express 2.0 x16
Memory	4 GB GDDR5, 2500 MHz 128-bit memory I/O path 80 GB/s memory bandwidth
Connectors	1 DL-DVI(I) output, 2 DisplayPort outputs Factory Configured Option: No video cable adapter included Option Kit: One DP-to-DVI adapter included with card Additional DVI-to-VGA, DisplayPort-to-VGA or DisplayPort-to-DVI adapters are available as accessories
Maximum Resolution	DisplayPort: up to 4096 x 2160 x 30 bpp @ 60Hz supports High Bit Rate 2 (HBR2) and Multi-Stream Transport (MST) DL-DVI(I) output: up to 2560 x 1600 x 32 bpp @ 60Hz Single Link-DVI(I) output: up to 1920 x 1200 x 32 bpp @ 60Hz VGA (via adapter cable): 2048 × 1536 × 32 bpp at 85 Hz
Image Quality Features	12-bit internal display pipeline (hardware support for 12-bit scan-out on supported panels, applications and connection) Stereoscopic 3D display support including NVIDIA® 3D Vision™ technology, 3D DLP, Interleaved, and passive stereo
Display Output	Maximum number of displays 3 direct attached monitors 4 using DP 1.2a with MST and HBR2 enabled monitors Maximum number of DisplayPort displays possible (may require MST and/or HBR2): 4 1920×1200 4 2560×1600 2 4096×2160 Maximum number of monitors across all available Quadro K2200 outputs is 4.
Shading Architecture	Full Microsoft DirectX 11.1 Shader Model 5.0
Supported Graphics APIs	OpenGL 4.4 DirectX 11.1 API support includes: CUDA C, CUDA C++, DirectCompute 5.0, OpenCL, Java, Python, and Fortran
Available Graphics Drivers	Microsoft Windows 8.1 Microsoft Windows 8 Microsoft Windows 7 Linux HP qualified drivers may be preloaded or available from the HP support Web site.
	note:1 Quadro K2200 offered as Factory Configured Option does not include a video cable adapter. Video cable adapters must be ordered separately.2 Quadro K2200 offered as an Option Kit includes one DP-to-DVI video cable adapter. Additional cables must be ordered separately.3 A total maximum of 4 active monitors are supported across all display output types. This may be accomplished by using daisy chained DisplayPort 1.2 displays or a DisplayPort 1.2 hub device.4 A DisplayPort hub device may be used to connect multiple DisplayPort monitors to a single Quadro K2200 DisplayPort output.

Specification	Description
Form factor	4.376” H x 9.5” L Single Slot, Full Height Weight: ~461 grams (without extender)
Graphics controller	NVIDIA Quadro K4200 Graphics Card Kepler GK104 GPU 1344 CUDA cores Max Power: 108 Watts
Bus Type	PCI Express 2.0 x16
Memory	4 GB GDDR5, 2700 MHz 256-bit memory I/O path 173 GB/s memory bandwidth
Connectors	1 DL-DVI(I) 2 DisplayPort 1.2a CTO: No video cable adapter included AMO: One DP-to-DVI adapter included with card Additional DVI-to-VGA, DisplayPort-to-VGA or DisplayPort-to-DVI adapters are available as accessories
Maximum Resolution	DisplayPort: up to 3840 x 2160 x 30 bpp @ 60Hz supports High Bit Rate 2 (HBR2) and Multi-Stream Transport (MST) DL-DVI(I) output: up to 2560 x 1600 x 32 bpp @ 60Hz Single Link-DVI(I) output: up to 1920 x 1200 x 32 bpp @ 60Hz VGA (via adapter cable): 2048 × 1536 × 32 bpp at 85 Hz
Image Quality Features	10-bit internal display processing (hardware support for 10-bit scanout for both windowed desktop and full screen, only available on Windows with Aero disabled and Linux) NVIDIA® 3D Vision™ technology, 3D DLP, Interleaved, and other 3D stereo format support Full OpenGL quad buffered stereo support Support for large-scale, ultra-high resolution visualization using the NVIDIA® SVS platform which includes NVIDIA® Mosaic, NVIDIA® Sync and NVIDIA® Warp/Blend technologies
Display Output	Maximum number of displays 3 direct attached monitors 4 using DP 1.2a with MST and HBR2 enabled monitors Maximum number of DisplayPort displays possible (may require MST and/or HBR2): 4 1920×1200 4 2560×1600 2 3840×2160 Maximum number of monitors across all available Quadro K4200 outputs is 4.
Shading Architecture	Shader Model 5.0
Supported Graphics APIs	OpenGL 4.4 DirectX 11.1 API support includes: CUDA C, CUDA C++, DirectCompute 5.0, OpenCL, Java, Python, and Fortran
Available Graphics	Windows 8.1 Windows 8 Windows 7 Linux HP qualified drivers may be preloaded or available from the HP support Web site.
	note:Quadro K4200 offered as CTO does not include a video cable adapter.Video cable adapters must be ordered separately.Quadro K4200 offered as AMO includes one DP-to-DVI video cable adapter.Additional cables must be ordered separately.A total maximum of 4 active monitors are supported across all display output types. This may be accomplished by using daisy chained DisplayPort 1.2 displays or a DisplayPort 1.2 hub device.A DisplayPort hub device may be used to connect multiple DisplayPort monitors to a single Quadro K4200 DisplayPort output.

Specification	Description
Form factor	4.376” H x 10.5” L Dual Slot Weight: ~880 grams (without extender)
Graphics controller	NVIDIA Quadro K5200 GPU: GK110-850-B1 with 2304 CUDA cores Power: 150 Watts
Bus Type	PCI Express 3.0 x16
Memory	Size: 8GB GDDR5 Memory bandwidth: 192GB/s Memory Width: 256-bit
Connectors	DVI-I (1), DVI-D (1), DP (2), Optional 3D Stereo bracket with 3-pin mini-DIN connector. Factory configured option: No adapter included with card. Option Kit: No adaptor included with card. DVI to VGA, DisplayPort to VGA, DisplayPort to DVI, and DisplayPort to Dual-Link DVI adapters available as accessories.
Maximum Resolution	DisplayPort: up to 4096 x 2160 x 30 bpp @ 60Hz supports High Bit Rate 2 (HBR2) and Multi-Stream Transport (MST) DL-DVI(I) output: up to 2560 x 1600 x 32 bpp @ 60Hz Single Link-DVI(I) output: up to 1920 x 1200 x 32 bpp @ 60Hz VGA (via adapter cable): 2048 × 1536 × 32 bpp at 85 Hz
Image Quality Features	10-bit internal display processing (hardware support for 10-bit scanout for both windowed desktop and full screen, only available on Windows with Aero disabled and Linux). NVIDIA® 3D Vision™ technology, 3D DLP, Interleaved, and other 3D stereo format support. Full OpenGL quad buffered stereo support. Support for NVIDIA® Quadro® Mosaic, NVIDIA® nView® multi-display technology, NVIDIA® Enterprise Management Tools. Support for large-scale, ultra-high resolution visualization using the NVIDIA® SVS platform which includes NVIDIA® Mosaic, NVIDIA® Sync and NVIDIA® Warp/Blend technologies.
Display Output	Maximum number of displays: 4 direct attached monitors 4 using DP 1.2a with MST and HBR2 enabled monitors Maximum number of DisplayPort displays possible (may require MST and/or HBR2): 4 1920×1200 4 2560×1600 2 4096×2160 Maximum number of monitors across all available Quadro K5200 outputs is 4.
Shading Architecture	Shader Model 5.0
Supported Graphics APIs	OpenGL 4.4 DirectX 11 API support for NVIDIA’s CUDA™ C, CUDA C++, DirectCompute 5.0, OpenCL, Java, Python, Fortran
Available Graphics Drivers	Microsoft Windows 8.1 Microsoft Windows 8 Microsoft Windows 7 Linux – Full OpenGL implementation, complete with NVIDIA and ARB extensions HP qualified drivers may be preloaded or available from the HP support Web site.
	note:1 Factory configured Quadro K5200 does not include a video cable adapter. Video cable adapters must be ordered separately.2 A total maximum of 4 active monitors are supported across all display output types. This may be accomplished by using daisy chained DisplayPort 1.2 displays (displays must support MST and HBR2).

Specification	Description
Form factor	4.376” H x 10.5” L Dual Slot Power: 234 Watts Weight: ~880 grams
Graphics controller	NVIDIA Quadro K6000 Graphics Card based on the GK180 GPU Core Count: 2880 Base Clock: 797 MHz Boost Clock: 902 MHz
Bus Type	PCI Express 3.0 x16
Memory	12GB GDDR5 384-bit memory I/O path 288 GB/s memory bandwidth ECC Memory
Connectors	DVI-I (1), DVI-D (1), DP (2), Optional 3D Stereo bracket with 3-pin mini-DIN connector. Factory configured option: No adapter included with card. Option Kit: No adaptor included with card. DVI to VGA, DisplayPort to VGA, DisplayPort to DVI, and DisplayPort to Dual-Link DVI adapters available as accessories.
Image Quality Features	DisplayPort with Multi-Stream Technology (MST) and High Bit Rate 2 (HBR2), HDMI 1.4, and HDCP support NVIDIA 3D Vision™ technology NVIDIA Premium Mosaic and nView
Display Output	400 MHz integrated RAMDAC Maximum resolution over VGA (through DVI to VGA cable): 2048 × 1536 × 32 bpp at 85 Hz Dual-link internal TMDS (DVI 1.0) Maximum resolution over digital port (single GPU and SLI mode): 2560 × 1600 × 32 bpp at 60 Hz (reduced blanking) Single-link internal TMDS (DVI 1.0) Maximum resolution over digital port (single GPU and SLI mode):1920 × 1200 × 32 bpp at 60 Hz (reduced blanking) DisplayPort with MST and HBR2 Maximum resolution: 3840 × 2160 × 36 bpp at 60Hz HDMI: Maximum resolution: 1920 × 1080 × 32 bpp at 60Hz
Shading Architecture	Shader model 5.0 Support Full IEEE 764-2008 32-bit and 64-bit precision
Supported Graphics APIs	Full OpenGL 4.3 Full DirectX 11 CUDA API support includes: CUDA C, CUDA C++, DirectCompute 5.0, OpenCL, Java, Python, and Fortran
Available Graphics Drivers	Windows 8 Windows 7 Professional (64-bit and 32-bit) Red Hat Enterprise Linux (RHEL) 6 Desktop/Workstation SUSE Linux Enterprise Desktop 11 (64-bit and 32-bit) HP qualified drivers may be preloaded or available from the HP support Web site. Novell SUSE Linux Enterprise drivers may also be obtained from: ftp://download.nvidia.com/novell or http://www.nvidia.com
	note: NVIDIA GRID VGX Pass Through feature supported on NVIDIA Quadro K6000 to enable direct mapping of GPU to Virtual Machine.No display output adapter included.

Specification	Description
Form factor	Low Profile, half length (full-height bracket included)
Graphics controller	AMD FirePro™ W2100 professional graphics based on Oland GPU. GPU: 320 Stream Processors organized into 5 Compute Units GPU Frequency: 630MHz Power: 35W Cooling: Active
Bus Type	PCI Express® x8, Generation 3.0
Memory	2GB DDR3 memory Memory Bandwidth: 28.8 GB/s Memory Width:128bit
Connectors	2x Display Port 1.2 connectors Factory Configured: No video cable adapter included Option Kit: One DP-to-DVI adapter included with card Additional DisplayPort-to-VGA or DisplayPort-to-DVI adapters are available as Factory Configuration or Option Kit accessories.
Maximum Resolution	DisplayPort 1.2: up to 4096×2160 x 30 bpp @ 60Hz Dual Link DVI(I) (requires adapter cable): up to 2560 x 1600 x 32 bpp @ 60Hz Single Link-DVI(I)(requires adapter): up to 1920 x 1200 x 32 bpp @ 60Hz VGA(requires adapter): up to 1920 x 1200 x 32 bpp @ 60Hz
Image Quality Features	Advanced support for 8-bit, 10-bit, and 16-bit per RGB color component. High bandwidth scaler for high quality up and downscaling.
Display Output	2 x DisplayPort® 1.2 Maximum number of displays: 2
Shading Architecture	Shader Model 5.0
Supported Graphics APIs	OpenCL™ 2.0, DirectX® 11.2/12 and OpenGL 4.4
Available Graphics Drivers	Windows 8.1 (64-bit and 32-bit) Windows 7 (64-bit and 32-bit) HP qualified drivers may be preloaded or available from the HP support Web site.
	note:Depending on the card model, native DisplayPort™ connectors and/or certified DisplayPort™ active or passive adapters to convert your monitor’s native input to your card’s DisplayPort™ or Mini-DisplayPort™ connector(s) may be required. See http://www.amd.com/firepro for details.

Specification	Description
Form factor	Full height, full length, single slot (6.75” X 3.75”)
Graphics controller	AMD FirePro W5100 graphics based on the “Bonaire” GPU GPU Frequency: 1000MHz GPU: 768 Stream Processors organized into 12 Compute Units Power: <75 Watts Cooling: Active
Bus Type	PCI Express® x16, Generation 3.0
Memory	4GB GDDR5 memory Memory Bandwidth: 96 GB/s Memory Width: 128bit
Connectors	4x Display Port 1.2 connectors with HBR2 and MST support. Factory Configured: No video cable adapter included. After market option kit: One DP-to-DVI adapter included with card. Additional DisplayPort-to-VGA or DisplayPort-to-DVI adapters are available as Factory Configuration or Option Kit accessories.
Maximum Resolution	DisplayPort: 4096×2160 @24bpp 60Hz Dual Link DVI: 2560×1600 (requires DP to DL-DVI adapter) Single Link DVI: 1920×1200 (requires DP to DVI adapter) VGA: 1920×1200 (requires DP to VGA adapter)
Image Quality Features	Advanced support for 8-bit, 10-bit, and 16-bit per RGB color component. High bandwidth scaler for high quality up and downscaling.
Display Output	Max number of monitors supported using DisplayPort 1.2a: 4 direct attached monitors 6 using DP 1.2a with MST and HBR2 enabled monitors Monitor chaining from a single DisplayPort (subject to a max of 6 total monitors across all outputs, requires use of DisplayPort enabled monitors supporting MST and HBR2): one 4096×2160 display two 2560×1600 displays four 1920×1200 displays
Shading Architecture	Shader Model 5.0
Supported Graphics APIs	OpenGL 4.4v OpenCL 2.0vi DirectX 11.2 / 12 AMD Mantle
Available Graphics Drivers	Windows 8.1 (64-bit and 32-bit) Windows 7 (64-bit and 32-bit) Linux HP qualified drivers may be preloaded or available from the HP support Web site.

Optical and Removable Storage

Specification	Description
Interface Type	Compatible with SAS or SATA controllers. Offers 6Gb/s performance when used with 6Gb/s HDDs.
Dimensions (WxHxD)	147.6 x 41.1 x 205 mm (5.81 x 1.62 x 8.08 in)
Weight	Frame and Carrier: 1.73 kg (3.8 lbs.) Carrier: 0.45 kg (1 lbs.)

Specification	Description
Description	Supports hardware ECC (Error Correction Code) function Supports hardware CRC (Cyclic Redundancy Check) function Supports MS 4-bit parallel transfer mode Supports MS-PRO 4-bit parallel transfer mode Supports MS PRO-HG Duo 4-bit parallel transfer mode Supports SD 4-bit parallel transfer mode Supports UHS-104 SD 4-bit card (version 3.0) Supports CF v6.0 with PIO mode 6 and Ultra DMA 7 mode
Interface Type	USB 3.0 High-speed interface note:If there is a USB2 connection, USB2 transfer speeds are supported.
Dimensions (W x H x D)	4.9 x 4 x 1 in (124.5 x 101.6 x 25.4 mm) Fits conveniently in the 5.25″ drive bay.
Supported Media Types	CompactFlash Type I CompactFlash Type II Microdrive Secure Digital Card (SD) Secure Digital High Capacity (SDHC) SD Extended Capacity Memory Card (SDXC) SD Ultra High Speed II(SD UHSII) Memory Stick Memory Stick Select Memory Stick Duo (MS Duo) Memory Stick PRO (MS PRO) Memory Stick PRO Duo (MS PRO Duo) Memory Stick PRO-HG Duo MagicGate Memory Stick (MG) MagicGate Memory Stick Duo These additional media types are supported with a card adapter. Memory Stick Micro (M2) miniSD miniSD High Capacity Micro SD Memory Card (MicroSD) Micro SD High Capacity Memory Card (MicroSDHC) Test Parameters/Conditions – Power applied, unit operating on system ±5%
Operating Systems Supported	Windows 8 Pro (64-bit)* Windows 8.1 (64-bit)* Windows 8 (64-bit)* Windows 7 Ultimate (32-bit)** Windows 7 Ultimate (64-bit)** Windows 7 Professional (32-bit)** Windows 7 Professional (64-bit)** Windows 7 Home Basic** Windows 7 Home Premium (32-bit)** Windows 7 Home Premium (64-bit)** Windows Vista Business 64 Windows Vista Business 32 Windows Vista Home Basic 32 Windows XP Professional Windows XP Home 32 No driver is required for this device. Native support is provided by the operating system. Not all features are available in all editions of Windows 8. Systems may require upgraded and/or separately purchased hardware, drivers and/or software to take full advantage of Windows 8 functionality. See http://www.microsoft.com. Not all features are available in all editions of Windows 7. This system may require upgraded and/or separately purchased hardware to take full advantage of Windows 7 functionality. See http://www.microsoft.com/windows/windows-7/ for details.
Kit Contents	Media card reader, 5.25″ bracket/rails/bezel, Install Guide, IO & Security Software and Documentation CD
Approvals	USB-IF, WHQL, Compliant with USB Mass Storage Class Bulk only Transport Specification Rev. 1.0, Compliant Intel Front Panel I/O Connectivity Design Guide V. 1.3, FCC, CE, BSMI, C-Tick, VCCI, MIC, cUL, TUVT
Weight	0.16 kg (0.35 lbs)

Controller Cards

Specification	Description
Data Transfer Rate	Supports up to 800 Mb/s
Devices Supported	IEEE-1394 compliant devices
Bus Type	PCIe card full height PCIe slots
Ports	Two IEEE-1394b external 9-Pin connectors (Rear)
Internal Connectors	One 10-Pin header connector
System Requirements	Windows 8.1 64-bit, Windows 7 Professional 32-bit and 64-bit, SLED 11 and RHEL 6. Intel i5 series or higher processor, min 2GB of RAM, 20GB Hard Drive, CD-ROM drive, built in sound system, Available PCIe slot.
Temperature – Operating	10° to 55° C (50° to 131° F)
Temperature – Storage	-30° to 60° C (-22° to 140° F)
Relative Humidity – Operating	20% to 80%
Compliances	FCC Part 15B, cULus 60950, CE Mark EN55022B(1995)/EN55024-1998 STD, Taiwan BSMI CNS13438, Korea MIC
Operating Systems Supported	Windows 8.1 64-bit, Windows 7 Professional 32-bit and 64-bit

Specification	Description
Data Transfer Rate	Supports up to 20 Gb/s (20,000 Mb/s)
Devices Supported	Thunderbolt™ certified devices
Bus Type	PCIe card, full or half height PCIe slots
Ports	One Thunderbolt™ 2 external 20-Pin output connectors (Rear) One full size DisplayPort input connector (Rear)
Internal Connectors	One 5-Pin header connector
System Requirements	Genuine Windows 7 Professional 64-bit, Genuine Windows 8.1 64-bit, Intel i5 series or higher processor, 4-GB RAM, 20-GB Hard Drive, available PCIe slot.
Temperature – Operating	10° to 55° C (50° to 131° F)
Temperature – Storage	-30° to 60° C (-22° to 140° F)
Relative Humidity – Operating	20% to 80%
Compliances	FCC Part 15B, cULus 60950, CE Mark EN55022B(1995)/EN55024-1998 STD, Taiwan BSMI CNS13438, Korea MIC
Operating Systems Supported	Genuine Windows 7 Professional 64-bit, Genuine Windows 8.1 64-bit.
Kit Contents	HP Thunderbolt™ 2 PCIe 1-port I/O Card, full height and half height bracket, DisplayPort to DisplayPort cable, internal header cables (2), user documentation and warranty card.

Networking and Communications

Specifications	Description
Hardware Certifications	FCC B, UL, CE, VCCI, BSMI, CTICK, KCC

Specifications	Description
Operating Temperature	0°C to 45°C (32°F to 113°F)
Operating Humidity	0% to 85%, noncondensing
Dimensions (H x W x D)	1.19 x 1.38 x 5.57 cm (0.47 x 0.54 x 2.19 in)

Specifications	Description
Operating Humidity	Operating: 10% to 90% (non-condensing) Non-operating: 5% to 95% (non-condensing)
Dimensions (H x W x D)	Native HMC: 26.8 x 30.0 x 2.4 mm Carrier Card Assembly 84 x 119 mm (3.3 x 4.7 in)
Kit Contents	PCIe x1 card with full height bracket, rf antenna, antenna cable, separate low profile bracket, software CD and warranty.
	note: WLAN supplier’s client utility is required for Cisco Compatible Extensions support with Microsoft Windows XP. WLAN may also be compatible with certain third-party software supplicants. WLAN supplier IHV extensions required for Cisco Compatible Extensions support for Microsoft Windows Vista. Check latest software/driver release for updates on supported security features. Maximum output power may vary by country according to local regulations. In Power Save Polling mode and on battery power. Receiver sensitivity is measured at a packet error rate of 8% for 802.11b (CCK modulation) and a packet error rate of 10% for 802.11a/g (OFDM modulation).

Specification	Description
Connector	RJ-45 (motherboard integration)
Controller	Intel I210 GbE platform LAN connect networking controller
Memory	Programmable FIFO packet buffer memory Tx 24KB default Rx up to 16KB
Data rates supported	10/100/1000 Mbps
Compliance	802.1as 802.1q 802.1Q 802.3 802.3ab 802.3ap 802.3az 802.3u 802.3x 802.3z
Bus architecture	PCI Express 2.1 (x1) and SMBus
Data transfer mode	PCIe-based interface for active state operation (S0 state) and SMBus for host and management traffic (Sx low power state)
Power requirement	Requires 3.3V only (integrated regulators)
Boot ROM Support	Yes
Network Transfer Mode	Full-duplex; Half-duplex (not supported for the 1000BASE-T transceiver)
Network Transfer Rate	10BASE-T (half-duplex) 10 Mbps 10BASE-T (full-duplex) 20 Mbps 100BASE-TX (half-duplex) 100 Mbps 100BASE-TX (full-duplex) 200 Mbps 1000BASE-T (full-duplex) 2000 Mbps
Management Capabilities	WOL, auto MDI crossover, PXE, Multi-port teaming, RSS, Advanced cable diagnostics

Specifications	Description
Connector	RJ-45 (motherboard integration)
Controller	Intel I218LM GbE platform LAN connect networking controller
Memory	3 KB FIFO packet buffer memory (both Tx and Rx)
Data Rates Supported	10/100/1000 Mbps
Compliance	802.1as, 802.1p, 802.1Q, 802.3, 802.3ab, 802.3az, 802.3i, 802.3u, 802.3x, 802.3z
Bus Architecture	PCI Express 1.1 (x1) and SMBus
Data Transfer Mode	PCIe-based interface for active state operation (S0 state) and SMBus for host and management traffic (Sx low power state)
Power Requirement	Requires 3.3V only (integrated regulators)
Boot ROM Support	Yes
Operating Humidity	Full-duplex; Half-duplex (not supported for the 1000BASE-T transceiver)
Network Transfer Mode	13.50 x 6.4 cm (5.3 x 2.5 in) (without brackets)
Network Transfer Rate	10BASE-T (half-duplex) 10 Mbps 10BASE-T (full-duplex) 20 Mbps 100BASE-TX (half-duplex) 100 Mbps 100BASE-TX (full-duplex) 200 Mbps 1000BASE-T (full-duplex) 2000 Mbps
Management Capabilities	WOL, auto MDI crossover, PXE, Multi-port teaming, RSS, Advanced cable diagnostics AMT 9.1 support, vPro compliant

Specification	Description
Connector	Two RJ-45
Controller	Intel® Ethernet I350 Controller
Data rates supported	10/100/1000 Mbps, Half- and full-duplex
Compliance	802.3, 802.3u, 802.3x, 802.3ab, 802.3ad, 802.1p, 802.1Q, 802.3az, IEEE 1588 PCIe v2.0 standard RoHS (6 of 6) FCC (U.S. only) Class B DOC (Canada) Class B CE EN 55024, EN55022 Class B VCCI Class II UL 1950 CSA 950 EN 60950 CE ACPI 1.1a Microsoft WHQL (Windows Hardware Quality Labs)
Data Path Width	Four lane (x4) PCI Express compatible with x4, x8, and x16 PCI Express slots
Power requirement	4.1W idle without EEE link partner 3.2W idle with EEE link partner 4.2W maximum
Network Transfer Rate	10BASE-T (half-duplex) 10 Mb/s 10BASE-T (full-duplex) 20 Mb/s 100BASE-TX (half-duplex) 100 Mb/s 100BASE-TX (full-duplex) 200 Mb/s 1000BASE-T (full-duplex) 2000 Mb/s
Operating Temperature	0° to 55° C (32° to 131° F)
Operating Humidity	10% to 95% non-condensing
Dimensions (H x W x D)	13.50 x 6.4 cm (5.3 x 2.5 in) (without brackets)
Operating System Driver Support	Windows 7 Professional 32-bit and 64-bit Red Hat Enterprise Linux(RHEL) WS4, 5, 6 Desktop/Workstation Novell SLED 10 & SLED 11
Kit Contents	HP 361T PCIe Dual Port Gigabit NIC PCA with a standard height bracket attached to it (the low profile bracket is included in the clamshell that the PCA ships in) Product Warranty statement and the Quick Install Card (QIC).

Physical specifications

Specification	Description
Chassis (H x W x D)	44.4 x 20.3 x 52.5 cm (17.5 x 8.0 x 20.7 in)
System weight	Actual weight depends upon configuration Minimum configuration: 21.1kg (46.7lbs.) Typical configuration: 22.8kg (50.4lbs.) Maximum configuration: 29.2kg (64.3lbs.)

Software/OS

Feature	Description
Operating systems (Preinstalled)	Windows 8.1 Pro 64-bit* Windows 7 Professional 64-bit (available through downgrade rights from Windows 8.1 64-bit)** Windows 7 Professional (MSNA) 64-Bit* HP Linux Installer Kit Red Hat Enterprise Linux (RHEL) Workstation – Paper License (1yr)1 note:* Not all features are available in all editions or versions of Windows. Systems may require upgraded and/or separately purchased hardware, drivers and/or software to take full advantage of Windows functionality.** This system is preinstalled with Windows® 7 Pro software and also comes with a license and media for Windows 8.1 Pro software. You may only use one version of the Windows software at a time. Switching between versions will require you to uninstall one version and install the other version. You must back up all data (files, photos, etc.) before uninstalling and installing operating systems to avoid loss of your data. note:1 This second OS must be ordered with the HP Linux Installer Kit as the first OS.
Software	HP Performance Advisor HP Remote Graphics Software (RGS) 6.0 MS Office Home & Business 2013 Cyberlink PowerDVD and Power2Go Foxit PhantomPDF Express

note:

HP Cloud Recovery download tool (Cloud Recovery Client) is available under Software and Drivers section on the support page.

Environmental Data

Specifications	Description
Temperature	Operating: 5°C to 35°C (40°F to 95°F) Non-operating: -40°C to 60°C (-40°F to 140°F)
Humidity	Operating: 8% to 85% RH, non-condensing Non-operating: 8% to 90% RH, non-condensing
Maximum Altitude	Operating: 3,000 m (10,000 ft) Non-operating: 9,100 m (30,000 ft)
Dynamic (new)	Shock Operating: ½-sine: 40 g, 2-3ms (~62 cm/sec) Non-operating: ½-sine: 160 cm/s, 2-3ms (~105 g) square: 20 g, 422 cm/s note:Values represent individual shock events and do not indicate repetitive shock events.Vibration Operating random: 0.5g (rms), 5-300 Hz, up to 0.0025 g²/Hz Non-operating random: 2.0g (rms), 5-500 Hz, up to 0.0150 g²/Hz
Cooling	Above 1524m (5,000 ft.) altitude, maximum operating temperature is de-rated by 1°C (1.8°F) per 305m (1,000 ft.) elevation increase